technical-guides Sealant Staining on Stone and Concrete: Why It Happens and How to Prevent It Posted by Siken Team October 26, 2026 0 A stained facade is one of the most expensive complaints in the sealant business, because the defect is visible from the street, i... Continue reading
technical-guides Adhesion Failure or Cohesive Failure? How to Diagnose a Failed Sealant Joint Posted by Siken Team October 21, 2026 0 When a sealant joint fails, the first question on site is usually the wrong one: which product failed? The more useful question is... Continue reading
technical-guides Automotive Glass Adhesive: Direct Glazing with Moisture-Cure Polyurethane Posted by Siken Team October 21, 2026 0 Direct glazing means the windscreen is bonded into the body rather than held by a rubber gasket. That change made the glass part o... Continue reading
technical-guides Insulating Glass Sealant: How Two-Component Secondary Sealing Works Posted by Siken Team October 21, 2026 0 An insulating glass unit fails quietly. There is no crack, no visible damage, just condensation between the panes a few years afte... Continue reading
technical-guides Fire Rated Silicone Sealant: What the Standards Actually Require Posted by Siken Team October 21, 2026 0 A fire rated sealant is not a sealant that resists heat. It is a sealant whose behaviour in a fire has been tested against a named... Continue reading
technical-guides How Much Sealant Per Metre of Joint? Cartridge Yield Explained Posted by Siken Team October 21, 2026 0 Ordering the wrong quantity is one of the most common cost leaks in sealing work — and it is entirely avoidable. Whether you are p... Continue reading
28 Sep technical-guides Roof-to-Wall and Window-to-Wall Sealant Transitions: Details That Stop Leaks Posted by Siken Team October 21, 2026 0 Water rarely enters a building through the middle of a panel. It enters at the junctions, and none are more exposed than roof-to-w... Continue reading
21 Sep technical-guides How to Clean Cured Silicone Sealant Joints: A Care Guide for Distributors and Facility Engineers Posted by Siken Team October 21, 2026 0 How to clean cured silicone sealant joints is a frequent question from distributors and facility engineers. A properly installed s... Continue reading
14 Sep technical-guides How to Repair Aged Curtain Wall Sealant Joints: A Step-by-Step Re-Sealing Guide Posted by Siken Team October 21, 2026 0 A practical step-by-step guide to repairing aged curtain wall sealant joints: failure signs, cut-out and cleaning, backing rod, sealant selection and handover checks. Continue reading
08 Sep distributor-resources Sealant Pricing for Distributors: How to Protect Margin Without Losing Orders Posted by Siken Team October 21, 2026 0 Sealant is a high-volume business where margins can disappear quietly - through freight spikes, currency swings, free samples and ... Continue reading