How to Choose MS Polymer Sealant for Prefabricated Buildings
Prefabricated construction changes everything about sealing — joints are wider, movements are larger, and the finish must be flawless. MS polymer sealant has become the specification of choice for PC panel buildings. Here is how to choose the right one. The 8018 MS sealant for prefabricated buildings is our recommended MS polymer option for modular and prefab projects.
1. Movement Capability: The Non-Negotiable
PC panel joints move more than any other building joint — thermal expansion, wind load, and panel settlement all stress the sealant. Look for MS polymer grades with Class 25 or Class 35 movement capability. If the joint design allows less movement than the building produces, no sealant will survive.
2. Paintability: The Advantage Silicone Cannot Match
Traditional silicone cannot be painted — a constant headache on visible facades. MS polymer seals the joint and accepts paint directly over it, producing a seamless finish without masking. For architects specifying exposed concrete or coated panels, this is often the deciding factor. Verify the paint adhesion test data before specifying.
3. Primer-Free Adhesion on Difficult Substrates
PC panels come with concrete, coatings, and sometimes residual mold release agents. A quality MS polymer bonds to concrete, aluminum, steel, and most coated surfaces without primer, cutting installation time and eliminating adhesion failures. Ask your supplier for adhesion test reports on your specific substrates.
4. Sustainability and Occupant Safety
MS polymer contains zero isocyanates and zero solvents — it is safe for installers during application and for occupants after curing. With green building standards tightening globally, this is no longer optional. Confirm the VOC data and solvent-free formulation in writing.
5. For Distributors: What to Verify
When sourcing MS polymer under your own brand, request: full TDS and MSDS, batch test reports, elongation and tensile data, UV weathering records, and consistent color matching. A manufacturer that provides all five is a partner, not just a supplier.
Contact Us
Related guide: Silicone vs MS Polymer Sealant comparison
Shandong Silicon New Material Co., Ltd — certified sealant manufacturer specializing in structural, weatherproof, MS polymer, and PV sealants.
📧 info@sikenshop.com
📱 WhatsApp: +8613780876997
🌐 sikenshop.com
